manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 560

Network Operation and Remote Control

R&S

®

FPL1000

560

User Manual 1178.3370.02 ─ 11

9.2.2.8

 

STATus:QUEStionable:EXTended:INFO Register

The 

STATus:QUEStionable:EXTended:INFO

 register contains information on the

type of messages that occur during operation of the R&S

 

FPL1000. A separate 

INFO

register exists for each active channel.

You can read out the register with 

STATus:QUEStionable:EXTended:INFO:

CONDition?

 or 

STATus:QUEStionable:EXTended:INFO[:EVENt]?

. You can

query all messages that occur for a specific channel using the command 

SYSTem:

ERRor:EXTended?

 

on page 970.

Table 9-8: Meaning of the bits used in the STATus:QUEStionable:EXTended:INFO register

Bit No.

Meaning

0

MESSage

This bit is set if event or state has occurred that may lead to an error during further operation.

1

INFO

This bit is set if an informational status message is available for the application.

2

WARNing

This bit is set if an irregular situation occurs during measurement, e.g. the settings no longer
match the displayed results, or the connection to an external device was interrupted temporarily.

3

ERRor

This bit is set if an error occurs during a measurement, e.g. due to missing data or wrong set-
tings, so that the measurement cannot be completed correctly.

4

FATal

This bit is set if a serious error occurs in the application and regular operation is no longer possi-
ble.

5 to 14

Unused

15

This bit is always 0.

9.2.2.9

 

STATus:QUEStionable:FREQuency Register

The STATus:QUEStionable:FREQuency register contains information about the condi-
tion of the local oscillator and the reference frequency. A separate frequency register
exists for each active channel.

You can read out the register with 

STATus:QUEStionable:FREQuency:

CONDition?

 or 

STATus:QUEStionable:FREQuency[:EVENt]?

.

Table 9-9: Meaning of the bits used in the STATus:QUEStionable:FREQuency register

Bit No.

Meaning

0

OVEN COLD

This bit is set if the reference oscillator has not yet attained its operating temperature. "OCXO"
is displayed.

1

LO UNLocked

This bit is set if the local oscillator no longer locks. "LOUNL" is displayed.

2 to 7

Not used

Status Reporting System

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands