Ronde & Schwarz 1304.0004K03, User Manual

Page: 673 / 1071

Remote Commands
R&S
®
FPL1000
673 User Manual 1178.3370.02 ─ 11
CALCulate<n>:ESPectrum:PSEarch:MARGin <Threshold>
CALCulate<n>:ESPectrum:PEAKsearch:MARGin <Margin>
This command defines the threshold of the list evaluation.
Suffix:
<n>
.
Window
Parameters:
<Margin> Range: -200 to 200
*RST: 200
Default unit: dB
Example: CALC:ESP:PSE:MARG 100
Sets the margin to 100 dB.
Manual operation: See "Margin" on page 186
CALCulate<n>:ESPectrum:PSEarch:PSHow <State>
CALCulate<n>:ESPectrum:PEAKsearch:PSHow <State>
This command turns the peak labels in the diagram on and off.
Peak labels are blue squares.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: CALC:ESP:PSE:PSH ON
Marks all peaks with blue squares.
Manual operation: See "Show Peaks" on page 186
10.6.7.8 Performing an SEM Measurement
The following commands are required to perform an SEM measurement:
●
SENS:SWE:MODE ESP
, see
[SENSe:]SWEep:MODE
on page 649
●
INITiate<n>[:IMMediate]
on page 616
10.6.7.9 Retrieving Results
The following commands analyze and retrieve measurement results for SEM measure-
ments.
●
CALCulate<n>:LIMit<li>:FAIL?
on page 907
●
TRACe<n>[:DATA]
on page 823
●
TRACe<n>[:DATA]:MEMory?
on page 824
●
TRACe<n>[:DATA]:X?
on page 825
Configuring and Performing Measurements