manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 580

Network Operation and Remote Control

R&S

®

FPL1000

580

User Manual 1178.3370.02 ─ 11

(See 

"Using a DNS server to determine the IP address"

 

on page 580 and 

Chap-

ter 9.5.1.3, "How to Change the Instrument Name"

, 

on page 581).

5. Enter the "IP Address", for example 

192.0.2.0

. The IP address consists of four

number blocks separated by dots. Every block contains a maximum of 3 numbers.

6. Enter the "Subnet Mask", for example 

255.255.255.0

. The subnet mask consists of

four number blocks separated by dots. Every block contains a maximum of 3 num-
bers.

7. Close the dialog box.

If you have entered an invalid IP address or subnet mask, the message "out of
range" is displayed in the status line. If the settings are correct, the configuration is
saved, and you are prompted to restart the instrument.

8. Confirm the displayed message ("Yes" button) to restart the instrument.

Using a DNS server to determine the IP address

If a DNS server is configured on the R&S

 

FPL1000, the server can determine the cur-

rent IP address for the connection using the permanent computer name.

1. Obtain the name of your DNS domain and the IP addresses of the DNS and WINS

servers on your network (see 

Chapter 9.5.1.3, "How to Change the Instrument

Name"

, 

on page 581).

2. Press the [Setup] key and then the "N Remote" softkey.

3. In the "Network" tab, select the "Open Dialog 'Network Connections'" button.

4. Double-tap the "Ethernet" entry.

5. In the "Ethernet Status" dialog box, select the "Properties" button.

The items used by the Ethernet connection are displayed.

6. Tap the entry named "Internet Protocol Version 4 (TCP/IPv4)" to highlight it.

How to Set Up a Network and Remote Control

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands