manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 975

Remote Commands

R&S

®

FPL1000

975

User Manual 1178.3370.02 ─ 11

Example: 

SYSTem:HPC HP

Manual operation: 

See 

"Coupling"

 

on page 573

SYSTem:IFGain:MODE 

<Mode>

Configures the internal IF gain settings in HP emulation mode due to the application
needs. This setting is only taken into account for resolution bandwidth < 300 kHz and is
only available if a HP language is selected using 

SYSTem:LANGuage

 

on page 975.

Parameters:

<Mode>

NORMal | PULSe

NORMal

Optimized for high dynamic range, overload limit is close to ref-
erence level.

PULSe

Optimized for pulsed signals, overload limit up to 10 dB above
reference level.
*RST: 

NORM

Example: 

SYST:IFG:MODE PULS

Manual operation: 

See 

"IF Gain"

 

on page 572

SYSTem:LANGuage 

<Language>

This command selects the system language.

Example: 

SYST:LANG 'PSA'

Emulates the PSA.

Manual operation: 

See 

"Language"

 

on page 572

SYSTem:PSA:WIDeband 

<State>

This command defines which option is returned when the 

*OPT?

 query is executed,

depending on the state of the wideband option.

It is only available for PSA89600 emulation.

Parameters:

<State>

ON | OFF | HIGH

OFF

The option is indicated as "B7J"

ON

The 40

 

MHz wideband is used.

The option is indicated as "B7J, 140".

HIGH

The 80

 

MHz wideband is used.

The option is indicated as "B7J, 122".
*RST: 

OFF

Emulating Other Instruments' Commands

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands