General Instrument Setup
R&S
®
FPL1000
522
User Manual 1178.3370.02 ─ 11
The messages are displayed in the order of their occurrence; the most recent mes-
sages are placed at the top of the list. Messages that have occurred since you last vis-
ited the system messages tab are marked with an asterisk '*'.
If the number of error messages exceeds the capacity of the error buffer, "Message
Buffer Overflow" is displayed. To clear the message buffer use the "Clear All Mes-
sages" button.
The following information is available:
No
device-specific error code
Message
brief description of the message
Component
hardware messages: name of the affected module
software messages: name of the affected software
Date/Time
date and time of the occurrence of the message
Remote command:
8.4.4
Firmware Updates
Access
: [Setup] > "System Configuration" > "Firmware Update"
During instrument start, the installed hardware is checked against the current firmware
version to ensure the hardware is supported. If not, an error message is displayed
("Wrong Firmware Version") and you are asked to update the firmware. Until the firm-
ware version is updated, self-alignment fails. To see which components are not suppor-
ted, see the
.
System Configuration Settings
