Remote Commands
R&S
®
FPL1000
638
User Manual 1178.3370.02 ─ 11
If you have defined an absolute limit as well as a relative limit, the R&S
FPL1000 uses
the lower value for the limit check.
Suffix:
<n>
.
irrelevant
<li>
irrelevant
<ch>
1..n
Alternate channel number
Parameters:
<LowerLimit>
The limit of the lower adjacent channel.
Range:
-200 dBm to 200 dBm
*RST:
-200 dBm
Default unit: dBm
<UpperLimit>
The limit of the upper adjacent channel.
Range:
-200 dBm to 200 dBm
*RST:
-200 dBm
Default unit: dBm
Manual operation:
See
CALCulate<n>:LIMit<li>:ACPower:ALTernate<ch>:ABSolute:STATe
<State>[,
<State>]
This command turns the absolute limit check for the alternate channels on and off.
You have to activate the general ACLR limit check before using this command with
CALCulate<n>:LIMit<li>:ACPower[:STATe]
.
Suffix:
<n>
.
irrelevant
<li>
irrelevant
<ch>
1..n
Alternate channel number
Parameters:
<State>
ON | OFF | 1 | 0
Absolute limit check for lower alternate channel
*RST:
0
<State>
ON | OFF | 1 | 0
Absolute limit check for upper alternate channel
*RST:
0
Manual operation:
See
Configuring and Performing Measurements
