Ronde & Schwarz 1304.0004K03, User Manual

Page: 184 / 1071

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
184 User Manual 1178.3370.02 ─ 11
For details, see "How to Manage SEM Settings Files" on page 189.
Standard files for sub blocks (Multi-SEM measurements)
If more than one sub blocks are defined, the "Standard Files" tab and softkey are not
available. To load a standard file for an individual sub block, use the
Multi-SEM (Sub
Block) Settings setting in the "Sub Blocks" tab.
Selecting Storage Location - Drive/ Path/ Files ...........................................................184
File Name ....................................................................................................................184
Load Standard .............................................................................................................185
File Explorer ................................................................................................................ 185
Save Standard ............................................................................................................ 185
Delete Standard .......................................................................................................... 185
Restore Standard Files ............................................................................................... 185
Selecting Storage Location - Drive/ Path/ Files
Select the storage location of the file on the instrument or an external drive.
The default storage location for the SEM settings files is:
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_std
.
Remote command:
MMEMory:CATalog
on page 912
File Name
Contains the name of the data file without the path or extension.
By default, the name of a user file consists of a base name followed by an underscore.
Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005
.
Measurements and Results