manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, User Manual

Share
Download
Ronde & Schwarz 1304.0004K03 User Manual Download Page 588

Network Operation and Remote Control

R&S

®

FPL1000

588

User Manual 1178.3370.02 ─ 11

The drive is shared and can be accessed by the selected users.

9.5.5

 

How to Control the R&S

 

FPL1000 via the Web Browser Interface

Via the LAN web browser interface to the R&S

 

FPL1000, one or more users can con-

trol the instrument remotely from another PC without additional installation. Most instru-
ment controls are available via the front panel simulation. File upload and download
between the instrument and the remote PC is also available.

To access the R&S

 

FPL1000 via the web browser interface

1. Start a web browser that supports html5 (W3C compliant).

2. Enter the IP address of the R&S

 

FPL1000 in the browser's address bar.

The R&S

 

FPL1000's Welcome page is displayed.

3. In the navigation pane, select "Instrument Control > Web Control".

The instrument's display is shown in a new browser window, with a software front
panel displayed beside or below it.

4. Use the mouse cursor to access the functionality in the software front panel or in

the display as you would directly on the instrument's front panel.

To exchange files with the R&S

 

FPL1000

You can download files, for example stored measurement data, from the R&S

 

FPL1000

to the remote PC, or upload files, for example limit line definitions, from the PC to the
R&S

 

FPL1000.

1. In the web browser, select the Welcome page window.

2. In the navigation pane, select "Instrument Control" > "File Upload" or "File Down-

load".

How to Set Up a Network and Remote Control

Summary of Contents for 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands