Ronde & Schwarz 1304.0004K03, User Manual

Page: 361 / 1071

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
361 User Manual 1178.3370.02 ─ 11
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:ZOOM[:STATe]
on page 841
Deactivating All Search Limits ← Search Limits
Deactivates the search range limits.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
on page 840
CALCulate<n>:THReshold:STATe
on page 842
6.9.3.2 Marker Search Settings for Spectrograms
Access : "Overview" > "Analysis" > "Markers" > "Search"
or : [MKR TO] > "Search Config"
Spectrograms show not only the current sweep results, but also the sweep history.
Thus, when searching for peaks, you must define the search settings within a single
time frame (x-direction) and within several time frames (y-direction).
These settings are only available for spectrogram displays.
Search Mode for Next Peak in X-Direction ................................................................. 362
Search Mode for Next Peak in Y-Direction ..................................................................362
Marker Search Type ....................................................................................................362
Marker Search Area .................................................................................................... 363
Exclude LO ..................................................................................................................363
Peak Excursion ........................................................................................................... 363
Auto Max Peak Search / Auto Min Peak Search .........................................................363
Search Limits .............................................................................................................. 364
└ Search Limits (Left / Right) ........................................................................... 364
Marker Usage