Ronde & Schwarz 1304.0004K03, User Manual

Page: 502 / 1071

Data Management
R&S
®
FPL1000
502 User Manual 1178.3370.02 ─ 11
For the R&S FPL1000, test reports are only available in Spectrum mode, and only if
the R&S FPL1-K54 is installed.
For details on the provided information, see:
●
"Diagram" on page 118
●
"Spectrogram" on page 119
●
"Marker Table" on page 118
●
"Marker Peak List" on page 118
●
"Result Summary" on page 119
●
Chapter 8.7, "Transducers" , on page 531
●
"LISN Control Settings" on page 269
●
Result list : a table that contains the trace values for each trace point
A maximum of 50001 measurement points per trace are written to the report. The
rest is dismissed.
If you have more measurement points, export the data to an ASCII file (see
"Export
Trace to ASCII File" on page 454 ).
●
Settings : basic instrument and measurement-specific settings (as indicated in the
channel setup bar)
Select All / Select None
Selects or deselects all items in the corresponding area:
●
Diagrams
●
Tables
●
All items
Remote command:
HCOPy:TREPort:ITEM:SELect
on page 942
7.5.2 Managing Templates
Access : > "Report menu" > "Templates"
Some general functions to manage test report templates are available on all "Tem-
plates" subtabs.
Template name ............................................................................................................502
Save ............................................................................................................................ 503
Load ............................................................................................................................ 503
Default .........................................................................................................................503
Template name
Enter the path and filename of the template in the input field, or select the directory
using the "..." button.
Working with Test Reports