Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 380 / 438

FSE Programming Examples
1065.6016.12 7.1 E-16
7 Programming Examples
The examples explain the programming of the instrument and can serve as a basis to solve more
complex programming tasks.
QuickBASIC has been used as programming language. However, the programs can be translated into
other languages.
Programming via IEC/IEEE Bus
Including IEC-Bus Library for QuickBasic
REM ----------- Include IEC-bus library for quickbasic ----------------
’$INCLUDE: ’c:\qbasic\qbdecl4.bas’
Initialization and Default Status
The IEC bus as well as the settings of the instrument are brought into a defined default status at the
beginning of every program. Subroutines
"InitController"
and
"InitDevice"
are used to this
effect.
Initiate Controller
REM ------------ Initiate controller -----------
REM InitController
iecaddress% = 20
’IEC-bus address of the
’instrument
CALL IBFIND("DEV1", analyzer%) ’Open port to the instrument
CALL IBPAD(analyzer%, iecaddress%) ’Inform controller on instrument
’address
CALL IBTMO(analyzer%, 11) ’Response time to 1 sec
REM ************************************************************************
Initiate Instrument
The IEC-bus status registers and instrument settings of the instrument are brought into the default
status.
REM ------------ Initiate instrument --------------
REM InitDevice
CALL IBWRT(analyzer%, "*CLS")
’Reset status register
CALL IBWRT(analyzer%, "*RST") ’Reset instrument
REM*************************************************************************