Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 292 / 438

FSE TRIGger Subsystem
1065.6016.12 6.235 E-16
TRIGger Subsystem
The TRIGger subsystem is used to synchronize instrument actions with events. This makes it possible
to control and synchronize the start of a sweep. An external trigger signal can be fed to the connector at
the rear panel of the instrument. In split screen mode, a distinction is made between TRIGger1 (screen
A) and TRIGger2 (screen B).
COMMAND PARAMETERS UNIT COMMENT
TRIGger<1|2>
[:SEQuence]
:SOURce
:LEVel
[:EXTernal]
:VIDeo
:AF
:HOLDoff
:SLOPe
:VIDeo
:FORMat
:LPFRame
:FIELd
:SELect
:LINE
:NUMBer
:SSIGnal
:POLarity
:SYNChronize
:ADJust
:FRAMe
:AUTO
:SLOT
:AUTO
:SOURCe
IMMediate | LINE | EXTernal |VIDeo |
RFPower | TV | AF
<numeric_value>
<numeric_value>
<numeric_value>
<numeric_value>
POSitive|NEGative
525 | 625
ALL | ODD | EVEN
<numeric_value>
NEGative | POSitive
<numeric_value>
ONCE
<numeric_value>
ONCE
FRAMe | TSC
--
V|MV|UV
PCT
PCT | HZ |
DEG | RAD
S
--
s
s
TV only with option TV
Demodulator
Option TV Demodulator
Option TV Demodulator
Option TV Demodulator
Option TV Demodulator
Option FSE-K11
Option FSE-K11 & FSE-B7
Option FSE-K11
Option FSE-K11 & FSE-B7
Option FSE-K11or FSE-K10
& FSE-B7
:TRIGger<1|2>[:SEQuence]:SOURce IMMediate | LINE | EXTernal | VIDeo | RFPower | TV | AF
This command selects the trigger source for the start of a sweep.
Example:
":TRIG:SOUR EXT"
Features: *RST value: IMMediate
SCPI: conforming
Modes: A, VA, BTS, MS
The value IMMediate corresponds to the "FREE RUN" setting.
Selecting the parameter TV is possible only when the option TV-demodulator is fitted, the parameter
AF only in the vector signal analysis mode with analog demodulation.