Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 177 / 438

HCOPy Subsystem FSE
1065.6016.12 6.120 E-16
:HCOPy:ABORt
This command aborts a running hardcopy output.
Example:
":HCOP:ABOR"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
This command is an event which is why it is not assigned an *RST value and no query.
:HCOPy:DESTination<1|2> <string>
This command selects the interface and the configuration (1 or 2) for the hardcopy device. The
availability of the parameters depends on the selected data format (see command
:HCOPy:DEVice:LANGuage
). { XE "Softkey:SETTINGS DEVICE 1/2" }{ XE "Softkey:HARDCOPY
DEVICE" }
Parameter:
FSE with NT controller
<string>::= ‘SYST:COMM:GPIB’ |
’SYST:COMM:SER1’ |
’SYST:COMM:SER2’ |
’SYST:COMM:CENT’ |
’MMEM’
FSE without controller / with DOS controller
Parameter:
<string>::= ’MMEM’ |
’SYST:COMM:PRIN’ |
’SYST:COMM:CLIP’
Example:
":HCOP:DEST2 ’MMEM’"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
This command is an event which is why it is not assigned an *RST value and no query.
:HCOPy:DESTination ’MMEM’
creates a file for the hardcopy output. Command
MMEM:NAME
<file_name>
defines the file name.
’MMEM’
creates a file for the hardcopy output. Command
MMEM:NAME
<file_name>
defines the file name. All formats can be selected for
:HCOPy:DEVice:LANGuage
.
’SYST:COMM:PRIN’
directs the hardcopy to the printer. The printer is selected with command
SYSTEM:COMMunicate:PRINter:SELect
.
GDI
should be selected for
:HCOPy:DEVice:LANGuage
.
’SYST:COMM:CLIP’
directs the hardcopy to the clipboard.
EWMF
should be selected for
:HCOPy:DEVice:LANGuage
.
’SYST:COMM:GPIB’
directs the hardcopy to the IEC/IEEE interface. All formats can be selected
for
:HCOPy:DEVice:LANGuage
.
’SYST:COMM:SER1’
directs the hardcopy to the serial interface COM1. All formats can be
selected for
:HCOPy:DEVice:LANGuage
.
’SYST:COMM:CENT’
directs the hardcopy to the parallel IEC/IEEE interface LPT. All formats can
be selected for
:HCOPy:DEVice:LANGuage
.
This command is an event which is why it is not assigned an *RST value and no query.