Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 181 / 438

HCOPy Subsystem FSE
1065.6016.12 6.124 E-16
:HCOPy:ITEM:WINDow<1|2>:TRACe:STATe ON | OFF
This command selects the output of the currently displayed trace (ON).
Example:
":HCOP:ITEM:WIND:TRACe:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes: A, VA, BTS, MS
The command
:HCOPy:ITEM:WINDow<1|2>:TRACe:STATe OFF
same as command
:HCOPy:ITEM:ALL
enables the output of the whole screen.
:HCOPy:ITEM:WINDow<1|2>:TRACe:CAINcrement ON | OFF
The command automatically changes the colour of the currently displayed trace after printout (ON).
Example:
":HCOP:ITEM:WIND:TRACe:CAIN ON"
Features: *RST value: OFF
SCPI: device-specific
Modes: A, VA, BTS, MS
The automatic change of colour of the trace allows outputting to a plotter of several traces of the
same diagram. For a better distinction, the colour of the trace is changed (”Color Auto Increment”).
:HCOPy:PAGE:DIMensions:QUADrant<1 to 4>
The command defines the quadrant which is allocated to the screen output.
Example:
":HCOP:PAGE:DIM:QUAD1"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
The quadrants are defined as QUAD1 at the top right, QUAD2 at the top left, QUAD3 at the bottom
left and QUAD4 at the bottom right. This command is an event which is why it is not assigned an
*RST value and has no query.
:HCOPy:PAGE:DIMensions:FULL
This command defines that the full screen is to be printed out.
Example:
":HCOP:PAGE:DIM:FULL"
Features: *RST value: -
SCPI: device-specific
Modes: A, VA, BTS, MS
This command is an event which is why it is not assigned and *RST value and has no query.
:HCOPy:PAGE:ORIentation<1|2> LANDscape | PORTrait
The command selects the format of the output (portrait and landscape) (hardcopy unit 1 or 2).
Example:
":HCOP:PAGE:ORI LAND"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS