Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 193 / 438

MMEMory Subsystem FSE
1065.6016.12 6.136 E-16
:MMEMory:LOAD:AUTO 1,<file_name>
This command defines which device setting is automatically loaded after the instrument is switched
on.
Parameter: <file_name> ::= DOS file name without extension;
FACTORY denotes the data set previously in the
instrument
Example:
":MMEM:LOAD:AUTO 1,’C:\USER\DATA\TEST’"
Features: *RST value: -
SCPI: device-specific
Modes: A, VA, BTS, MS
The contents of the file are read after switching on the instrument and used to define the new device
state. The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.
:MMEMory:MDIRectory <directory_name>
This command creates a new directory.
Parameter: <directory_name>::= DOS path name
Example:
":MMEM:MDIR ’C:\USER\DATA’"
Features: *RST value: -
SCPI: device-specific
Modes: A, VA, BTS, MS
The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.
:MMEMory:MOVE <file_source>,<file_destination>
This command renames existing files.
Parameter: <file_source>,<file_destination> ::= <file_name>
<file_name> ::= DOS file name
Example:
":MMEM:MOVE ’TEST01.CFG’,’SETUP.CFG’"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.