Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 244 / 438

FSE SENSe Subsystem
1065.6016.12 6.187 E-16
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:PATTern <string>
This command defines the synchronization sequence.A file that has been set previously by the
command
DDEM:SEARch:SYNC:SELect
becomes invalid.
Example:
":DDEM:SEAR:SYNC:PATT "1101001"
Features: *RST value: ""
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:STATe ON | OFF
This command switches the search for a synchronization sequence on or off.
Example:
":DDEM:SEARch:SYNC:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:NAME <string>
This command selects a sync file to be edited or entered anew.
Example:
":DDEM:SEAR:SYNC:NAME "PATT_NEW"
Feature: *RST value: ""
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:COMMent <string>
This command defines a comment on a sync file. This sync file must be previously selected by the
command
DDEM:SEARch:SYNC:NAME
.
Example:
":DDEM:SEAR:SYNC:COMM "PATTERN FOR PPSK"
Feature: *RST value: ""
SCPI: device-specific
Mode: VA-D
:[SENSe<1|2>:]DDEMod:SEARch:SYNC:DATA <string>
This command defines a synchronization pattern for the sync file. Inputs other than "1" or "0" are
interpreted as "Don’t Care Bits". This sync file must be previously selected by the command
DDEM:SEARch:SYNC:NAME
.
Example:
":DDEM:SEAR:SYNC:DATA "1101001"
Feature: *RST value: ""
SCPI: device-specific
Mode: VA-D