Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 179 / 438

HCOPy Subsystem FSE
1065.6016.12 6.122 E-16
:HCOPy:DEVice:PRESet<1|2> ON | OFF
This command resets the hardcopy unit (1 or 2) prior to generating the hardcopy (FSE without
controller or with DOS controller only)
Example:
":HCOP:DEV:PRES2 ON"
Features: *RST value: OFF
SCPI: device-specific
Modes: A, VA, BTS, MS
:HCOPy:DEVice:RESolution<1|2> 150 | 300
This command controls the resolution of the printout in PCL4 and HP-deskjet format (hardcopy unit 1
or 2) (FSE without controller or with DOS controller only).
Example:
":HCOP:DEV:RES 300"
Features: *RST value: 150
SCPI: conforming
Modes: A, VA, BTS, MS
The resolution for an output in PCL4 format is between 150 dpi or 300 dpi.
:HCOPy[:IMMediate<1|2>]
This command starts a hardcopy output.
Example:
"HCOP"
Features: *RST value: -
SCPI: conforming
Modes: A, VA, BTS, MS
HCOP[1]
starts the hardcopy output to device 1 (default),
HCOP2
starts the output to device 2.
This command is an event which is why it is not assigned an *RST value and has no query.
:HCOPy:ITEM:ALL
This command selects the complete screen to be output.
Example:
":HCOP:ITEM:ALL"
Features: *RST value: OFF
SCPI: conforming
Modes: A, VA, BTS, MS
The hardcopy output is always provided with comments, title, time and date. As an alternative to the
whole screen, only traces (commands
’:HCOPy:DEVice:WINDow:TRACe: STATe ON’
) or tables
(command
’:HCOPy:DEVice:WINDow:TABLe:STATe ON’
) can be output.