Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 123 / 438

CONFigure-Subsystem FSE
1065.6016.12 6.66 E-16
:CONFigure[:BTS]:MEASurement?
This command queries which measurement is currently set.
PFERror Phase-/Frequency Error
MACCuracy Modulation Accuracy
POWer Carrier Power
PTEMplate Power v. Time
MODulation Modulation Spectrum
SWITching Transient Spectrum
SPURious Spurious
Example:
":CONF:MEAS?"
Answer:
"PFER"
Features: *RST-value: -
SCPI:
device-specific
Mode: BTS
This command is a query and has therefore no *RST value assigned.
:CONFigure[:BTS]:ARFCn <numeric_value>
This command selects the number of the transmission channel of the base station.
Parameter: <numeric_value>::= 1 to 124 (P-GSM phase I/II)
0 to 124, 975 to 1023 (E-GSM)
0 to 124, 955 to 1023 (R-GSM)
512 to 885 (DCS1800 phase I/II/II+)
512 to 810 (PCS1900)
128 to 251 (GSM850)
Example:
":CONF:ARFC 67
"
Features: *RST value: 1 (P-GSM phase I/II)
0 (E-GSM; R-GSM)
512 (DCS1800 phase I/II/II+)
512 (PCS1900)
128 (GSM850)
SCPI: device-specific
Mode: BTS
:CONFigure[:BTS]:ARFCn:AUTO ONCE
This command is used to search for the channel number of the transmission channel of the base
station automatically. This requires only one channel to be active.
Example:
":CONF:ARFC:AUTO ONCE
"
Features: *RST value: --
SCPI: device-specific
Mode: BTS
This command is an event and thus has no query and no *RST value assigned.