manualshive.com logo in svg

Rohde & Schwarz 1065.6000.20, Operating Manual

Share
Download
Rohde & Schwarz 1065.6000.20 Operating Manual Download Page 127

CONFigure-Subsystem                                                                                           FSE

1065.6016.12

6.70

E-16

:CONFigure[:BTS]:POWer:SINGle:CLEar

This command clears the table containing the single-step carrier power measurements.

Example:

":CONF:POW:SING:CLE"

Feature:

*RST value:

--

SCPI:

device-specific

Mode:

BTS

This command is an event and has therefore neither *RST value nor query.

:CONFigure[:BTS]:CHANnel:SLOT    0 to 7

This command selects the slot number within a transmission frame of the base station.

Example:

":CONF:CHAN:SLOT 3

"

Features:

*RST value:

0

SCPI:

device-specific

Mode:

BTS

On changing the slot number, the number of the midamble (TSC) is automatically adapted to the slot.

:CONFigure[:BTS]:CHANnel:SLOT:AUTO   ONCE

This command automatically searches for the slot number within a transmission frame of the base
station. This requires only one slot to be active.

Example:

":CONF:CHAN:SLOT:AUTO ONCE

"

Features:

*RST value:

--

SCPI:

device-specific

Mode:

BTS

This command is an event and thus has no query and no *RST value assigned.

:CONFigure[:BTS]:CHANnel:SFH    ON | OFF

This command defines whether the base station uses slow frequency hopping or not.

Example:

":CONF:CHAN:SFH ON

"

Features:

*RST value:

OFF

SCPI:

device-specific

Mode:

BTS

This command is available only when spurious or transient spectrum measurement is selected. The
settings for spurious measurement are independent from those selected for transient spectrum.

Summary of Contents for 1065.6000.20























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands