Rohde & Schwarz 1065.6000.20, Operating Manual

Page: 117 / 438

CALCulate Subsystem FSE
1065.6016.12 6.60 E-16
:CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:STARt
This command sets the start frequency to the frequency of the current marker.
Example:
":CALC:MARK:FUNC:STAR"
Features: *RST value: -
SCPI: device-specific
Mode: A-F
This command is an "event" which is why it is not assigned an *RST value and has no query.
:CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:STOP
This command sets the stop frequency to the frequency of the current marker.
Example:
":CALC:MARK:FUNC:STOP"
Features: *RST value: -
SCPI: device-specific
Mode: A-F
This command is an "event" which is why it is not assigned an *RST value and has no query.
:CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:MSTep
This command sets the marker step width to the x-value of the current marker.
Example:
":CALC:MARK:FUNC:MST"
Features: *RST value: -
SCPI: device-specific
Modes: A, VA
This command is an "event" which is why it is not assigned an *RST value and has no query.
:CALCulate<1|2>:MARKer<1 to 4>:FUNCtion:REFerence
This command sets the reference level to that of the current marker.
Example:
":CALC:MARK:FUNC:REF"
Features: *RST value: -
SCPI: device-specific
Modes: A, VA
This command is an "event" and therefore has no *RST value assigned and no query.
This command is an <Event> and has therefore neither *RST value nor query. The numeric suffixes
in CALCulate<1|2> and MARKer<1 to 4> are not significant.