Porsche 996 TT, Repair Manual

Page: 459 / 2099

12 Hexagon−head bolt M8 x 45 1
13 Fastening nut M8 1 Replace
14 Fastening nut 1 Replace
15 Washer 1
16 Hexagon−head bolt M8 x 55 1
17 Hexagon−head bolt M8 x 45 1
18 Crash support 1
19 Tension rod bolts 11
20 Washer 11
21 O−ring 8 x 2 11 Replace, oiled lightly
22 O−ring 8.3 x 2.4 4 Replace
23 Tension rod bolts 2
24 Screw plug M18 x 1.5 1 Tightening torque 30 Nm (22 ftlb.)
25 Sealing ring A16 x 20 1 Replace
26 Screw plug M16 x 1.5 1
27 Sealing ring A16 x 20 1 Replace
28 Stud 3 Projection length 80 mm
29 Stud BM10 x 110 2 Projection length 110 mm
30 Stud 1 Projection length 60 mm
31 Stud BM8 x 22 1 Projection length 22 mm
32 Stud BM8 x 48 1 Projection length 49 mm
33 Stud BM10 x 105 1 Projection length 107 mm
34 Stud BM8 x 52 1
35 Stud BM8 x 28 1
36 Stud BM8 x 32 1
37 Stud BM10 x 140 1
38 Dowel sleeve 2
39 Stud BM10 x 60 1 Projection length 69.5
40 Pan−head screw M10 x 18 1 Tightening torque 45 Nm (33 ftlb.).
41 Stud BM10 x 70 1 Projection length 60 mm
top of page
Disassembling the crankcase
Note
The thrust plate, drive plate and the flywheel must be removed before fastening the engine onto the
engine holder or assembly support. •
einordnung
Disassembling the crankcase 396