Porsche 996 TT, Repair Manual

Page: 1718 / 2099

No. Procedure Instructions
1 Remove seat rail cover Unscrew the sheetmetal screws out of the seat rail cover at the front
−2−
. Pull seat rail cover on front end −2− out of the right and left seat
rails in forward direction
2 Undoing seat screws at
front Move seat to its rear limit position and undo the front M10 x 28 Torx
screws −3− from the right and left seat rails using an E12 socket
wrench insert
3 Undoing seat screws at
rear Move seat to its front limit position and undo the M10 x 28 Torx screws
−3−
from the right and left seat rails using an E12 socket wrench insert
4 Disconnecting the
electrical plug connection Release plug connector locking device on the side −arrow− and
separate the plug connection −4− .
top of page
einordnung
Removing front seat 1655