Porsche 996 TT, Repair Manual

Page: 1086 / 2099

3 Removing the
loudspeaker Undo the fastening screws −9− , raise the outside of the loudspeaker
−10−
and guide it out. At the plug connection −11− , press the locking
tab −arrow− and disconnect.
4 Removing the
instrument mount To remove the hazard warning light switch: switch on the switch
−12−
(button comes out). There are small openings on the sides which
now project over the instrument cowl. Insert two narrow screwdrivers
into the openings −arrow A− and pull off the button towards the
front. The hazard warning light switch −13− is held in the instrument
bridge −17− by two locking hooks −arrow B− . Press the right
locking hook towards the switch, grip the button holder with a pair of
pliers and pull out the switch towards the front. Press the collar −14−
out from the rear. Pull off the cover −15− on the left side and undo the
fastening screws −16− . Lift the instrument mount −17− on the left
and right and unclip from the clips −4− .
5 Disconnecting the
electrical plug
connection Disconnect the electrical connection −18− on the rear side of the
instrument mount. To do so, press the locking tab of the plug
connection and unlock the locking lever in the −direction of the
arrow−
.
einordnung
Disassembling the instrument panel 1023