Porsche 996 TT, Repair Manual

Page: 1668 / 2099

Unclip covering caps −3− . Unclip the cover −4− over the
roll−over protection −5− at the front, unscrew the fastening
screws −6− and lift the cover up and off.
3 Triggering roll−over
protection system with the
Porsche System Tester 2 Note:
Actuate the roll−over protection system −5− only if:
the hardtop is removed
•
the convertible top is open •
the caps are removed •
Connect the Porsche System Tester to the diagnostic socket.
Switch on ignition. Select menu item "Roll−over protection".
Select menu item "Drive links" in the command line which
then appears. Press the key combination described in the
Tester; the roll−over protection system is triggered.
4 Undoing fastening screws Undo the fastening screws from the modules in the auxiliary
frame −8− and pull out in downward direction.
5 Disconnecting the electrical
plug connection Press the electrical plug connection −9− −arrow A− and pull
apart.
top of page
Installing roll−over protection system
einordnung
Installing roll−over protection system 1605