Porsche 996 TT, Repair Manual

Page: 1684 / 2099

Compensating
element The compensating element −10−
is released by undoing the
fastening screw −18− . By screwing in the fastening screws
−8−
, the compensating element −10−
can be fixed and secured.
11 Fastening screws 2 => Tightening torque
12 Instrument panel
bracket 1 Undo the fastening screws −8−
in the compensating elements
−10−
and guide the instrument
panel bracket −12− out of the
body.
Insert instrument panel bracket −12−
into the body. Fix compensating
elements −10− to the instrument panel
bracket and screw down with the
fastening screws −8 and 11− .
13A Closure cap 2 Pull out. Press in.
13B Plug 2 Only installed on 911 coupé
versions.
14 Sheetmetal clip 4 Check, if necessary, replace.
15 Fastening screws 4 => Tightening torque
16A USA version,
knee protector
strip
1 Unscrew fastening screws −15−
from the knee protector strip
−16A−
. Remove the knee
protector strip.
Secure the knee protector strip −16A−
on the instrument panel bracket −12−
and tighten the fastening screw −15− .
16B USA version,
knee protector
strip
1 Unscrew fastening screws −15−
from the knee protector strip
−16B−
. Remove the knee
protector strip.
Secure the knee protector strip −16B−
on the instrument panel bracket −12−
and tighten the fastening screw −15− .
17 Cowl panel seal 1 Is destroyed when removed. Tighten protective film.
18 Adhesive pad 1 Is destroyed when removed.
Attach the adhesive pad for
left−hand drives on the right
holder and on the left holder for
right−hand drives. •
The bonding area must be free of dust
and grease.
Tighten protective film and position it.
=> Tools and materials
19 Clip 4
20 Fastening screws 4 => Tightening torque
21 Shear−off nut 2 Undo the shear−off nut with
special tool 9259.
=> Tools and materials
23 Airbag control
module 1 See: ’ 695319 Removing and
installing the triggering unit for
the airbag. See: ’ 695319 Removing and installing
the triggering unit for the airbag.
24 Cover panel 4 Fix the cover panel in the body and the
instrument panel bracket −12− and
screw down with the fastening screws
−20−
.
25 Fastening screws 2 => Tightening torque
einordnung
Removing and installing the instrument panel bracket 1621