Porsche 996 TT, Repair Manual

Page: 563 / 2099

5. Undo pressure pipe −middle− by removing the spring clip −5− , hose clamp −3− , hexagon−head bolts −1
& 2− and electrical plug −4− .
6. Pull off the electrical plug. Undo the fastening screws and remove the throttle
body.
7. Remove oil temperature sensor.
8. Remove plug (wrench size 19). Undo oil pressure sender. Important: always counter with a second wrench
(wrench size 22) when doing so. Pull off the electrical plug and unscrew the sender.
top of page
Installation
1. Fasten sender with new sealing ring. Counter with a second wrench when doing this. Push on the
electrical plug.
Sender tightening torque: 30 Nm (22 ftlb.)
einordnung
Removal 500