Porsche 996 TT, Repair Manual

Page: 618 / 2099

9. Carefully lift suspension subframe and fix with the six hexagon−head bolts −Items 2, 6 and 7− .
Screw suspension subframe into place to the prescribed tightening torque.
Tightening torque M14 x 1.5 : 160 Nm (118 ftlb.) (−Item 2− )
Tightening torque of corner plate to side member M10 x 1.5 : 65 Nm (48 ftlb.) (−Item 6− )
Tightening torque of corner plate to body M12 x 1.5 : 100 Nm (74 ftlb.) (−Item 7− )
10. Fit stabilizer to mount −left arrow− . To do this, screw two M10 hexagon nuts on the joint heads,
simultaneously countering at the joint hexagon with an open−ended wrench. Connect cable plug to sensor
of the headlight beam adjustment −right arrow− .
Tightening torque of M10 hexagon nut: 46 Nm (34 ftlb.)
Note
Replace hexagon−head bolts for fastening the steering gear to the suspension subframe and the fit bolt
for the universal joint whenever they have been removed. Screw threads must be clean and free of
grease. •
11. Position the steering gear with the centring sleeves in the through−holes on the suspension subframe and
screw into place with two new hexagon−head bolts a/f 15 M10 x 1.5 to the underside of the suspension
frame −5− ’ 48 90 19 Removing and installing steering gear .
Tightening torque 65 Nm (48 ftlb.).
einordnung
Installing fuel tank 555