Porsche 996 TT, Repair Manual

Page: 1076 / 2099

7. Deposit airbag unit correctly.
top of page
Installing side airbag unit
Installation of left/right identification of the side airbag unit:
Inscription R = Right door •
Inscription L = Left door
•
Locking pin −A− must always point to the rear •
The wire connection point −B− must always face the front •
Fastening clip M5 −C− always to the rear •
Note
The cover film behind the side airbag unit must not be damaged (protects against water leaking in)!
•
1. Install airbag unit with the inscription "R" in the right−hand door and fasten.
2. Engage electrical plug connection.
Tightening torque for fastening screws (4 screws M6 x 16): 10 Nm (7.5 ftlb.), (1 screw M5 x 10): 6 Nm (4.5
ftlb.)
3. Reinstall the door trim panel.
Removing sensor for side airbag unit
WARNING
Danger of injury and damage to property as a result of incorrect handling of airbag units!
Please observe the following points:
einordnung
Removing side airbag unit 1013