Porsche 996 TT, Repair Manual

Page: 1475 / 2099

No. Procedure Instructions
1 Preparing spare
parts Remove the factory−applied primer on the welding areas of the spare parts
−A, B,−
using the rotary brush.
Drill or punch (with a hole punch) 7 mm holes spaced 20mm apart for
plug−welding with shielding gas.
=> Welding in seat cross member
2 Cleaning the
welding areas Remove underbody coating and paint layers, etc. from the welding areas of
the body with the hot−air gun or rotary brush.
3 Measuring seat
cross member Measure the seat cross member at the front screwed points (hole center)
forward to the hole edge of the reinforcement in the floorpan
−dimension X = 405 mm−
−dimension Y = 453 mm−
top of page
einordnung
Preparation of seat cross member for installation and fitting 1412