Porsche 996 TT, Repair Manual

Page: 1210 / 2099

94 98 19 Removing and installing control module for
headlight beam adjustment
Note
Removing control module for headlight beam adjustment
Installing control module for headlight beam adjustment
Note
The control module is fastened on the right side of the dashboard beneath the passenger airbag unit! •
top of page
Removing control module for headlight beam adjustment
1. Remove footwell bulkhead and right air guide.
2. Undo control module from below (2 sheetmetal screws).
3. Unlock the electrical plug connection and take out control module.
top of page
Installing control module for headlight beam adjustment
Note
Once installed, the control module must be coded and calibrated with the Porsche System Tester 2! •
After this, the main headlights must be readjusted with a commercially available 5 mm ball−head
screwdriver (free blade length 150 mm)! •
1. Lock the electrical plug connection and fasten the control module to the bracket.
2. Install the right air guide and footwell
bulkhead.
Adjust the main headlights: ’ 0 Entire vehicle General
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
94 98 19 Removing and installing control module for headlight beam adjustment 1147