Porsche 996 TT, Repair Manual

Page: 1165 / 2099

6. Install the heating/air−conditioning control.
top of page
Entering the code number
1. If the car radio is disconnected from the power supply, it will be protected against theft the next
time it is connected.
2. After being switched on with the −ON− key, the term −CODE− is displayed followed by 4
asterisks.
3. The four−figure code number must be entered using the multi−function keys 1...0.
4. Example: code number 1530 (the code number can be found in the enclosed −CODE CARD− ). Enter the
code number with the multi−function keys.
5. The first asterisk disappears after the first number is entered. The second asterisk disappears after
the second number is entered, etc.
6. If the fourth number has been entered and all the other numbers were correct, the device switches itself on
automatically.
Note
The −CODE CARD− must always be stored without fail outside the vehicle in a safe place. In this
way, improper use can be excluded. The enclosed window stickers should be adhered to the inside of
the vehicle windows! •
7. If an incorrect code number has been entered, the term −CODE− will be displayed with the four asterisks
once more.
8. If an incorrect code is entered three times, the term −WAIT− is displayed and the device is blocked
for approx. 60 minutes.
9. Another three incorrect inputs block the device for an additional 60 minutes.
10. −Important:− the waiting time only counts down when the device is switched on.
Note
The new code number should be entered in the Motronic, test step vehicle data, using the Porsche
System Tester 2! •
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
einordnung
Installing the car radio 1102