Porsche 996 TT, Repair Manual

Page: 1729 / 2099

Installing motor for the lumbar support
No. Procedure Instructions
3 Motor for the lumbar support −3− Plug in white air hose −A− on motor −3− and insert into
styrofoam.
4 Electrical plug connection −2− Join plug −2− with electrical lead of motor.
top of page
Installing electrical line for the lumbar
No. Procedure Instructions
5a Electrical plug connection −5− with
control module for seat memory Fasten line to motor with tie wrap for the rear seat
adjustment and insert plug −5− on the control module
−4−
for the seat memory −arrow− .
5b Electrical plug connection −6− without
control module for seat memory Join plug connection −6− below the seat.
6 Electrical line −7− Lay line behind motor for along the lumbar support.
Observe routing under the lumbar support (airbag)
and along the seat frame −arrow− .
7 Electrical line Route the electrical line on the backrest frame parallel
to the air hose −A− and fix with tie wrap.
top of page
Installing lumbar support
No. Procedure Instructions
7 Lumbar support
−G− Insert lumbar support −G− into the backrest frame from above and fix with felt
strips −arrow− . Route red −B− and blue −C− air hose and fix loosely with tie
wraps.
1 Air hose −B, C− Connect air hose −B, C− on the valve box.
Install covering
for backrest.
Installing front
seat => Removing front seat
top of page
einordnung
Installing motor for the lumbar support 1666