Porsche 996 TT, Repair Manual

Page: 1539 / 2099

In order to ensure that the bonded joint is sufficiently strong, the following boundary conditions must be
adhered to:
Curing time: 3 hours •
Temperature: at least 10°C
•
Fixing time: approx. 1 hour •
Note
The removed windscreen can be reinstalled if there was no prior damage to the windscreen and the
windscreen was removed without damage. •
1. Fitting spacer blocks
Clip in spacer blocks and press in body−bound
rivets.
2. Fitting defroster covers and the alarm readiness light
Check the fastening clips −5− , replace if necessary. Insert the defroster covers left and right −3 and
4−
and clip in under the alarm readiness lug. Clip in alarm readiness light −2− .
3. Preparing 2−component bonding material for processing
=> Processing of Porsche 2−component window
bonding agents
Note
The bonding material has an open time of −15 min− , which means that the bonding material must be
applied and the car window must be assembled within this period of time. •
In order to ensure that the substance is completely mixed, apply a 30 mm long adhesive bead of fresh
adhesive to a piece of cardboard before processing.
•
einordnung
Fitting windscreen 1476