Porsche 996 TT, Repair Manual

Page: 1378 / 2099

3. Undo the drive shaft with spacer ring on the transmission flange.
4. Unscrew the lower linkage for the headlight height adjustment −arrow− (left side only). Counter with
open−ended wrench.
5. Loosen stabilizer mount −arrow− at stabilizer (counter with open−ended wrench).
7. Remove the lower fastening screw of the spring strut −arrow− .
8. Undo the nut on the tie rod end (if necessary counter with Torx screwdriver 9546 ). Press the tie rod end
off with a press−out tool 9560 .
9. Disengage the parking brake cable at the
parking brake lever. To do this, remove the
floor of the oddments tray in the centre
console. Undo the 2 M8 nuts −1− . Remove
the tab washer −3− from the retaining lug
−4−
with a screwdriver. Take the
corresponding parking brake cable out of the
guide.
10.
einordnung
Removing the drive shaft (Tiptronic transmission) 1315