Porsche 996 TT, Repair Manual

Page: 1696 / 2099

No. Procedure Instructions
1 Installing A−pillar
trim Before installation, check that the deformation element is seated properly
−4−
.
Check sheetmetal clips −5− and replace if necessary.
Insert the A−pillar trim −3− at the side of the windscreen frame (transition
point to instrument panel) in the −direction of the arrow− .
2 Clipping in A−pillar
trim Clip in the A−pillar trim −3− along the roof frame in the −direction of
arrow−
.
3 Installing
convertible−top peg
housing In order to avoid rattling noises, each of the convertible−top peg housings
on the left and right −2− must be facing outwards, in relation to the
centring pins fitted on the convertible top or hardtop, when tightening.
The convertible top must be closed or the hardtop must be fitted to check
the adjustment.
Tighten the fastening screws −1− .
=> Tightening torques
einordnung
Installing A−pillar trim 1633