Porsche 996 TT, Repair Manual

Page: 1650 / 2099

top of page
Installing rear three−point belt
No. Procedure Instructions
1 Removing the seat
belt Position seat belt −13− with the metal clip −12− , seat well and the fastening
screw −11− .
2 Installing seat
cushion Position seat cushion −9− onto the Velcro fastening strip and press on.
3 Removing seat belt
and fitting Make sure that the belt strap can run properly!
Screw the fastening screw −6− , washer −5− , seat belt with fitting −7− and
the spacer sleeve −8− tight on the inner lower side member.
Tightening torque: 50 Nm (37 ftlb.)
4 Installing automatic
belt device Position the automatic belt device −7− , making sure that the locking tab
−arrow−
of the automatic belt device is engaged correctly in the sheetmetal
einordnung
Installing rear three−point belt 1587