Porsche 996 TT, Repair Manual

Page: 1089 / 2099

12 Removing the electrical
air−conditioning and heating
regulator variant −47− and the car
radio −48, 49−
See: ’ 870219 Removing and installing
heating/air−conditioning control.
See: ’ 912019 Removing and installing the car radio.
13 Removing display and operator
control unit
(PCM)−50−
Press in and hold both spring clips −arrow A− . Pull out the
display and operator control unit −50− . Disconnect the
electrical plug connections −51− on the rear side of the display
and operator control unit.
See: ’ 911019 Removing and installing display and operator
control unit (PCM).
14 Removing the PCM retaining
bracket
Raise the retaining clip −arrow B− of the retaining bracket
−52−
and guide it out of the cut−out of the center nozzle −55−
.
Pull off the ground cable −53− .
15 Removing the center nozzle Undo the fastening screws −54− and guide the center nozzle
−55−
out of the instrument panel −1− .
Undo the fastening screws −56− from the inside of the
retaining bracket −57− .
=> Additional assembly notes for the cover and center nozzle
for the instrument panel – as of model year 2002
=> Removing cover and center nozzle for the instrument panel
Removing the regulator for wiping interval
1. Disconnect the
electrical plug
connection.
2. Press the locking tabs of the regulator for the wipe interval −arrows A− outwards and guide the regulator
out of the front cover towards the front.
Removing the cigarette lighter
einordnung
Removing the regulator for wiping interval 1026