Porsche 996 TT, Repair Manual

Page: 1584 / 2099

Installing sill cover
1
No. Procedure Instructions
1 Check U−clips and
replace if necessary Check U−clips −6− and replace if necessary. The U−clips must be fixed
firmly on the rim of the lower side member.
2 Fitting grommets All grommets are to be replaced before installing the sill cover −1− . Spray
grommets with a lubricant, e.g. silicone spray for simplified mounting of
the sill pegs −5− .
3 Fitting sill cover Position sill cover −1− on the premounted grommets on the side member
and tighten with fastening screws −2− .
4 Screwing on rear sill
cover Tighten rear sill cover and the rear wheel housing liner −3− using the
fastening screws −2− .
einordnung
Installing sill cover 1521