Porsche 996 TT, Repair Manual

Page: 233 / 2099

Visual inspection of the structural parts on the
connection points for gaping plate connections (e.g.
entry area on the side member under the rubber seal of
the door)
“
Check accessories for paint abrasion
(accessories which have been in contact
during the impact)
“
Drive vehicle onto a lifting platform and raise. Measure
the measuring points or reference points specified in
the repair check dimensions table diagonally,
horizontally and vertically using a compass or an
electronic measuring system and compare with the
specified values.
’ 5 Repair check dimensions
“
Drive vehicle onto a lifting platform and
raise. Measure the measuring points or
reference points specified in the repair
check dimensions table diagonally,
horizontally and vertically using a
compass or an electronic measuring
system and compare with the specified
values.
’ 5 Repair check dimensions
“
Decide whether vehicle is technically repairable
“
Determine scope of any existing damage
to vehicle parts
’ 4
If necessary, measure running gear
electronically
’ 44 Suspension alignment
“
Decide whether vehicle is economically repairable
“
Decide whether vehicle has to be
repaired
“
If necessary, repair vehicle
’ 5 Work sequence for accident repairs
996420, 996421, 996450, 996451, 996430, 996431, 996840, 996841
einordnung
5 Work sequence for determining scope of damaged vehicles involved in an accident 170