Porsche 996 TT, Repair Manual

Page: 870 / 2099

45 64 19 Remove and install booster pump for PSM
Removal
Installation
top of page
Removal
Note
The booster pump −1− is removed with the holder −1a− . •
1. Switch off ignition.
2. Remove cover −A− from the hydraulic unit.
3. For the removal of the booster pump, carry out the following removal
steps:
Remove suction line −2− for booster pump. Undo pressure pipe on the booster pump −3− . Close the lines
and the pump connections with suitable plugs.
Release plug −4− −arrows− and disconnect. Remove connector housing rearwards from out of the
bracket −moving arrow− .
Undo the three plastic fastening nuts −5− and remove the booster pump −1− with the holder −1a− .
top of page
45 64 19 Remove and install booster pump for PSM 807