Porsche 996 TT, Repair Manual

Page: 436 / 2099

2. Position tool at the primary lock and raise the lock.
−A−
Optical contact,
grey
−B− Optical contact, black
3. Pull carefully on the optical waveguide, e.g. −B− in the −direction of the arrow− . If it is not possible to
pull out the optical waveguide, check again whether the secondary lock has been completely unlocked and
whether the primary lock has been raised far enough.
Conduct a visual check of the locks, the connector housing and the contacts for any possible damage
and, if necessary, replace the damaged parts. •
Installing optical contacts on plug side
Remove the protective dust cap immediately before the connection procedure.
•
Check that the contact is in proper condition. •
1. Push optical contact −B− into the plug until it engages audibly.
−A− Optical contact,
grey
−B− Optical contact, black
einordnung
Removing optical contacts on plug side 373