Porsche 996 TT, Repair Manual

Page: 1242 / 2099

10 01 19 Removing and installing engine
Installing engine
Tightening torques: Removing and installing engine
top of page
Installing engine
Note
The engine−transmission unit is installed in the reverse order. The following points must be given
special attention!
•
1. Lift the engine−transmission unit carefully and in steps.
Note
Have a second person observe the engine−transmission clearance during lifting! •
Pay particular attention to the clearance between rear axle cross member, intake air distributor and oil
container! •
2. The following assembly work must be carried out before the final installation position is reached:
Fasten lower coolant hose to expansion tank.
Position the intake air distributor on the support pins and simultaneously fit the line of the
switch−over valves. Fasten the hexagon−head bolt.
3. Fasten vent line on the intake air distributor.
10 01 19 Removing and installing engine 1179