Porsche 996 TT, Repair Manual

Page: 1105 / 2099

No. Procedure Instructions
1 Removing −1− cover Use a plastic spatula to release the clipped connection out of the door
handle on all sides.
Unscrew the fastening screws −2, 3, 4− .
2 Removing plastic cover
(airbag) Press the cover out with a narrow screwdriver −5− . Unscrew the
fastening screw seated below it. Press light −7− out of the door trim
panel using a plastic spatula −10− .
Disconnect (pull off) electrical plug connection.
3 Disconnect bowden cable
and electrical plug
connection Disconnect electrical plug connection from the microswitch for the
door handle −9− and orientation lighting −10− .
Press lugs of the plastic clip −arrow A− and pull out towards the rear.
Push bowden cable −8− back into the end piece of the sleeve −arrow
B−
.
4 Removing door trim panel Unscrew expanding nut from the door trim panel. Unclip door trim
panel out of the door on all sides and lift up and off.
Clips −13, 14− must be replaced for assembly.
5 Removing airbag Disconnect electrical plug connection −15− .
Unscrew fastening screws −16− out of the side airbag −17− and
remove.
6 Removing frame Unscrew fastening screws −18− from the mount −19− .
7 Removing door sealing
film Pull off carefully on all sides.
8 Removing sound box Disconnect electrical plug connection from the sound box −21− .
Unscrew fastening screws −22− from the sound box −23− .
top of page
Installing door trim panel
einordnung
Installing door trim panel 1042