Porsche 996 TT, Repair Manual

Page: 1675 / 2099

8 Convertible−top
control module 1
9 Fastening screw 4 => Tightening torques
10 Holder 2
11 Fastening screw 4 => Tightening torques
12 Right bracket 1
13 Left bracket 1
14 Clip 2 Inspect and replace if necessary.
15 Fastening screw 1 => Tightening torques
16 Belt reel, left 1
17 Assembly key 1 Clip in.
18 Clip 2 Inspect and replace if necessary.
19 Holder 1
20 DME + Tiptronic
control unit
1
21 Collar nuts 2 => Tightening torques
22 Z drive VDKD cpl. 1
23 Convertible top Z
drive
1
24 Fastening nut 4 => Tightening torques
top of page
Tightening torques
Location Illustration Thread
Tightening
torque [Nm]
(ftlb.)
Hexagon−head bolts for installing the roll−over bar
−1−
M10 65 (48)± 6 (4.5)
Collar nuts for installing the rear Z−supports −2− M10 48 (36)
Hexagon−head bolt for installing the holder −10− −9− M6 9.7 (7)
Hexagon−head bolt for installing the bracket on the right
and left −12, 13− −11− M6 9.7 (7)
Hexagon−head bolt −15− 50 (37)
Collar nuts for installing the DME + Tiptronic control unit
on the holder −21− M6 7 (5)
Collar nuts for installing the convertible top Z drive −24− M6 6 (4.5)
996620, 996621, 996650, 996651, 996630, 996631
einordnung
Tightening torques 1612