Porsche 996 TT, Repair Manual

Page: 1005 / 2099

No. Procedure Instructions
Removing rear spoiler => Removing rear spoiler
1 Remove retaining strip
at the sides −2− The instructions, => Removing and installing frame with heat shield must
be used for the 996 Carrera 4S.
Remove collar nuts −1− and the retaining strips at the sides −2− . Pull off
anti−chafing film −3− . Pull off sheetmetal nut −4− .
2 Removing centre
retaining strip −5− Screw off collar nuts −6− and remove centre retaining strip −5− . Check
sheetmetal nuts −7− , replace if necessary.
3 Remove and
disassemble rear
bumper −8,− or −(8A)−
(USA version) Unscrew sheetmetal screws −11− and fastening screws −10− , remove
rear bumper −8, (8A)− with fitted heat shield −9− . Unscrew fastening
screws −12− , remove heat shield at the bottom centre −9− and rear
support −14− . If necessary, disassemble the rear support by unscrewing
the fastening screws −13− .
4 Removing centre heat
shield on top −18− Screw off collar nuts −17− and remove centre heat shield on top−18− .
einordnung
Removing rear bumper 942