Porsche 996 TT, Repair Manual

Page: 496 / 2099

9 Connecting rod nut
M9 x 1.25 12 Replace, tightening torque:
Initial tightening: 30 Nm (22 ftlb.)
Final tightening: 1 x 90° turn
10 Connecting rod 6 Note installation position and weight. Note
classification or matching number to
connecting−rod bearing cap
11 Connecting rod
bearing shell half
6 Replace
12 Connecting−rod
bearing cap
6 Note matching number to connecting rod
13 Connecting rod
bearing shell half
6 Replace
14 Con−rod bolts 12 Check
15 Main bearing shells
of bearings 2 to 7
12 Replace
16 Main thrust bearing
shells
2 Replace
17 Crankshaft 1 Check for wear,
carry out
sounding test
18 Roll pin 6.0 x 16 1 Check for presence and correct seat
top of page
Disassembling crankshaft
1. Remove tensioning sleeve (6 x 16) with a vice−grip wrench.
2. Clamp retaining plate P 209 a in the
vice.
3. Fasten the crankshaft to the retaining plate with 3 −pan−head screws− LO No. 928 102 151 01.
4. Loosen connecting rods with socket wrench insert M14 and remove.
einordnung
Disassembling crankshaft 433