Porsche 996 TT, Repair Manual

Page: 1093 / 2099

Installing the steering
column cover Position the steering column cover −44− on the instrument panel and
secure with the fastening screws −43− .
7 Installing the steering
column switch Connect the electrical plug connection of the steering column switch
−42−
and position on the steering column.
If necessary, install the contact unit −41− .
See: ’ 695419 Removing and installing the contact unit.
Position the cover −38− on the steering column switch and tighten with
the fastening screws −37− .
8 Installing the steering
column switch cover Position the top and bottom steering column switch cover or laterally
−33, 36, 35−
.
Using the fastening screws −32− , screw the steering column switch
cover at the bottom −36− together with the steering column switch cover
at the top −33− .
9 Installing left side
nozzles and main light
switch Connect the electrical plug connection −30− of the main light switch
−31−
.
Position the inner race −27− in the side nozzle −29− and engage the main
light switch in the inner race −27− by turning it slightly
counter−clockwise. Screw it down with the fastening nut −26− .
Tightening torque:−3.5 Nm (2.5 ftlb.)− Insert the side nozzle into the
instrument panel. Secure the side nozzle with the fastening screws −21− .
Place the control button −25− on the main light switch. Press the
covering cap −28− in.
10 Installing the right side
nozzles and the
temperature sensor
Engage the temperature sensor −24− from the rear into the instrument
panel −1− .
Insert the side nozzle −22− into the instrument panel −1− . Secure the
side nozzle with the fastening screws −21− .
Press in the covering caps −20, 20A− .
einordnung
Assembling the instrument panel 1030