Porsche 996 TT, Repair Manual

Page: 1990 / 2099

the wheel carrier holder.
7. Take off the brake disc after removing the countersunk screws. If a stuck brake disc cannot be removed,
evenly screw hexagon−head bolts into the two M8 threads of the brake disc, thereby pressing off the disc.
top of page
Explanation of 2−part brake disc
The PCCB brake discs consist of two parts on the front and rear axles (illustration shows front brake
disc). The brake disc −1− is screwed to the brake−disc chamber −2− with 10 screws (M6) −3− . •
The complete brake disc only is available as a spare part (disc + brake−disc chamber)! •
Do not separate the brake−disc chamber −2− and brake disc −1− from each other. It is also not
permissible and not necessary to turn the screws −3− . The screws are safeguarded against turning by
the compression in the bushing.
•
It is essential that the tightening torque of the 10 screws is not changed (do not turn the screws) as this
will have a negative effect on the sound behaviour. •
1 Brake disc
2 Brake−disc chamber
3 Screw (10 ea.)
top of page
Installation
Note
Do not confuse right and left brake discs during assembly! Distinguishing characteristic: Involute
shape, identification and spare part number (SP No.)! •
The brake discs are marked with R = right or L = left and with an arrow for the direction of rotation
(additional difference of right or left)! •
Spare part on left−hand side − third group number is odd. Example: SP No. Left brake disc =
996.352.031.02. •
Spare part on right−hand side − third group number is even. Example: SP No. Right brake disc=
996.352.032.02. •
1. Check that all parts are in perfect condition and replace them if necessary.
2. Clean the levelling and centring surfaces on the brake disc and wheel hub.
einordnung
Removal 1927