Porsche 996 TT, Repair Manual

Page: 1466 / 2099

No. Procedure Instructions
1 Separating the spot−welded
joint between the outer/inner
lower side members Cut through the spot−welded joint between the outer lower side
member and the inner lower side member −A− or between the
outer lower side member and the A−pillar −B− with the spotweld
cutter.
Cut through the connection to the side section −E− with the body
saw. Position the cut so that the spare body part (outer lower side
member) overlaps the side section by approx. 60 mm.
2 Sawing through the web plate Cut through the web plate at the top and bottom −F, G− with the
body saw.
3 Separating the spot−welded
joint between the outer/inner
lower side members Separate the spot−welded joint between the outer lower side
member and the inner lower side member −C− with the spotweld
cutter.
4 Separating the spot−welded
joint between the web
plate/inner lower side member Separate the spot−welded joint between the web plate and the
inner lower side member −D− with the spotweld cutter.
top of page
Preparation for installation of lower side member and fitting
einordnung
Preparation for installation of lower side member and fitting 1403