Porsche 996 TT, Repair Manual

Page: 1714 / 2099

No. Procedure Instructions
1 Fitting roof lining
connection for the rear
window Lift the metal clips using a plastic spatula −A− and insert a small
screwdriver under the metal clip −B− . Insert the connection seal
−24−
of the roof lining underneath the metal clips −C− . Ensure
that the clearance cuts of the roof lining −D− are positioned on the
electrical connection of the rear window.
Subsequently knock open the metal clips with a plastic hammer.
Make sure that the metal clips engage in the frame cutouts
2 Installing roof liner
connection to tension
bow Press the roof lining connection −23− into the groove of the tension
bow.
3 Installing brace of side
metal struts Insert brace −20− into the textile case of the roof lining. Insert brace
first at rear then bend and insert at front.
4 Tightening fastening
screws Position the bracing strap −Z− underneath the roof lining −21− and
scew on to the main bow with the fastening screw −19− .
einordnung
Installing rear roof lining 1651